My Cart: 0 item(s)
Thumbnail Filmstrip of TBS-2033-200 10-71 Blower - The Blower Shop High Helix 18 point teflon stripping Hard Anodized Images
2033 TBS 10-71 Billet 18 point stripping - Teflon
#200 Alcohol or E-85 only Rotors -
Billet front cover and bearing plates on both front and rear standard for added strength.
The front cover features and includes sight glass, oil drain plug and pressure relief valve.
Better throttle response and better low to mid range torque
Increased rotor speed provides a better signal to the carburetors and will make boost quicker than a slower turning blower.
Case interior and end plates are hard anodized for added wear and corrosion resistance for any fuels.
1" longer out back from a 8-71 Same in Front
Specs
100% CNC machined Billet Case made from 6061-T6 aluminum. (Not a Cast Case like our competitors)
Designed for any fuels, maximum boost and increased reliability.
Billet front cover and bearing plates on both front and rear standard for added strength
Billet Hard Anodized - 120 Degree Twist 3 lobe rotors
Recessed Bearing Plates in both front and rear of billet case
18 point stripping for extra high boost at above 7000 rpm Blower Speed
Will run -Methanol , and/or Nitro
Application
Blower is 465 Cubic Inches in Displacement and fits Standard 10-71 manifold and Standard carburetor adapter.
Ideal for most Big Block (454- 650) Aggressive Big Block Motors.
Can make 26 lbs boost on a 500 cu in at 40% overdrive
35 lbs on a 468
#200 Alcohol or E-85 only Rotors -
Billet front cover and bearing plates on both front and rear standard for added strength.
The front cover features and includes sight glass, oil drain plug and pressure relief valve.
Better throttle response and better low to mid range torque
Increased rotor speed provides a better signal to the carburetors and will make boost quicker than a slower turning blower.
Case interior and end plates are hard anodized for added wear and corrosion resistance for any fuels.
1" longer out back from a 8-71 Same in Front
Specs
100% CNC machined Billet Case made from 6061-T6 aluminum. (Not a Cast Case like our competitors)
Designed for any fuels, maximum boost and increased reliability.
Billet front cover and bearing plates on both front and rear standard for added strength
Billet Hard Anodized - 120 Degree Twist 3 lobe rotors
Recessed Bearing Plates in both front and rear of billet case
18 point stripping for extra high boost at above 7000 rpm Blower Speed
Will run -Methanol , and/or Nitro
Application
Blower is 465 Cubic Inches in Displacement and fits Standard 10-71 manifold and Standard carburetor adapter.
Ideal for most Big Block (454- 650) Aggressive Big Block Motors.
Can make 26 lbs boost on a 500 cu in at 40% overdrive
35 lbs on a 468
