My Cart: 0 item(s)
Specify Tall or Std Deck
Complete Blower Setup- for Big Block Chevy Engines w 9.8" or 10.2 Tall Deck engines- with Billet 14-71 Blower, with Billet Rotors, Hard Anodized
using a 2051.300 Blower Shop Blower
Excellent Street/Strip Setup Can Run Gas it will run E-85 and methanol
14-71 Gas & E-85 300 rotors , High Helix Billet Case w. Billet rotors,
Hard Anodized for Gas-E-85 or Alky
Billet Polished Case, Billet Rotors, Polished Billet Front Cover & Billet Bearing Plates
Polished Intake- The Blower Shop - Street type w pop off
3" Wide 8MM Drive Kit Complete
Polished Carb Adapter Plate
Dual 1050 ATM Gas Carbs Boost referenced
Linkage
Stainless fuel lines
Blower Shop Scoop with filters * with air filter option
1V or 2V accessory pulley included
We stock Innovators West Harmonic Balancers and RCD Blower Hubs
You can choose to run without a balancer since the blower belt absorbs the harmonic vibrations. Some engine Builders however insist on a Balancer, so we like to do what they want. Balancers begin at $450 and go up depending on keyway, and if you need crank trigger magnets. Hubs are around $190 and up - they are all double keyway.
Complete Blower Setup- for Big Block Chevy Engines w 9.8" or 10.2 Tall Deck engines- with Billet 14-71 Blower, with Billet Rotors, Hard Anodized
using a 2051.300 Blower Shop Blower
Excellent Street/Strip Setup Can Run Gas it will run E-85 and methanol
14-71 Gas & E-85 300 rotors , High Helix Billet Case w. Billet rotors,
Hard Anodized for Gas-E-85 or Alky
Billet Polished Case, Billet Rotors, Polished Billet Front Cover & Billet Bearing Plates
Polished Intake- The Blower Shop - Street type w pop off
3" Wide 8MM Drive Kit Complete
Polished Carb Adapter Plate
Dual 1050 ATM Gas Carbs Boost referenced
Linkage
Stainless fuel lines
Blower Shop Scoop with filters * with air filter option
1V or 2V accessory pulley included
We stock Innovators West Harmonic Balancers and RCD Blower Hubs
You can choose to run without a balancer since the blower belt absorbs the harmonic vibrations. Some engine Builders however insist on a Balancer, so we like to do what they want. Balancers begin at $450 and go up depending on keyway, and if you need crank trigger magnets. Hubs are around $190 and up - they are all double keyway.