Thumbnail Filmstrip of TBS-3121 Big Block Chevy Std Deck 250 "BABY" Billet Blower Package Polished 8mm Images
As of 9-1-22 the 250 Blowers will not be available again until an estimated December 30th to March 30th - We are re designing the rotors due to a worldwide shortage of the rotor blank material - Call Braden or Toni to place an order with a deposit - we are still taking orders.
, so we put this kit together as an alternative https://www.alkydigger.net/product/TBS2019-200-Bracket.html 2019-Bracket-Race
------------We will take a deposit on these since they not in supply -------
250 Mini Blower for BB Chev std Deck
3121 8mm low profile blower TBS 9.8" Deck Height std deck
BB Chevy- 250 Blower Setup - Standard Deck Big Block Complete Kit
with 8mm x 2" Wide Belt
Fits under hood usually with no modifications - overall height of manifold, blower and carb adapter is 10.56"
Solid Billet , with Billet 2 lobe rotors. Mirror like polishing.
makes PLENTY of boost for any engine up to 500 cu in - for Street or Marine use or Bracket Racing
Great Street sleeper blower to hide under the hood.
Requires a Short Water Pump
We also have it available for a tall deck . TBS-3125.8mm is the part number
Also Used in High Compression BB Chevy Race cars to add 3-4 lbs of boost to equalize Atmospheric conditions when the air gets dirty, and/or corrected elevation and density altitude caused a negative impact on your ET .
A 71 style Supercharger sticking out of the hood is always a nice addition, but it may not be what you are looking for. With our 250 BilletCharger blower series we have solved that problem. Still producing the most boost in the industry these dangerously powerful blowers come in a beautifully small package. Perfect for tight clearances and low profile under-the-hood applications.
2 Lobe Straight Rotors w/ Teflon* will make 10-11 lbs boost on a 540
10.8" Tall from valley to top of Blower
- CNC machined 6061-T6 Aluminum
- Increased Strength over cast
- Hard Anodized Interior
- Mirror-Like Polish
- Low Profile Design (6.56 tall including Billet Carb Adaptor)
- Single or Dual Carb (4150 or 4500 *Please Specify when Ordering)
2 Lobe Rotors -Billet Extrusion
- Teflon OD Stripping
- Full length rotor shaft for increased strength
- Maximum boost at low RPM
Billet Front Cover -Oil Level Sight Glass
- Oil Drain Plug -Polished Pressure Relief Valve
Billet Bearing Plates
- Increased Strength over cast
- Hard Anodized
- 250 Billet Supercharger with Snout
- Intake Manifold Tall Deck (4.31” tall, machined for water and Polished)
- Accessory Pulley 2V belt
- Supercharger Pulleys (*Please specify engine size and desired boost when ordering)
- Belt 8mm x 2" or Serpentine -order #3120 for serpentine blower
- Idler Assembly
- All Necessary Gaskets and Hardware
Intake bolts are 2" Stainless USS Threads Allen with thick AN WashersRecent comment from an ex carb, unblown customer:
Hey Mike, giving you another update. Car is working great!! Car on Saturday went 7.31 three times in a row. only varied 12 thou all day. I had a chance to watch the boost gauge all the way down the track. As soon as it comes off the chip it makes 6 psi and dont move the whole way down the track.