2039 FRONT OFFSET BILLET 10-71 TBS BLOWER W 18  point stripping  for any fuel - High Helix Rotors.

 Includes  1 or 2 V Belt accessory  and complete 8mm polished drive system  

WE CAN USE A FULL RACE 2036  RACE 10-71 BUT YOU WILL HAVE TO USE A CRANK TRIGGER DISTRIBUTOR  TO CLEAR BACK OF A 10-71 ADDS $600   MORE 

Has 300 ROTORS  which can be used with any fuel.  FOR ALL OUT CHOOSE OUR 2036 RACE 10-71  

Blower Shop 10-71  Complete Big Block PONTIAC   BILLET  BLOWER 

Includes:

 2039 TBS BILLET 18 POINT  Stripped for Gas, or E-85  ,       

 High  Helix Billet Rotors-   w Sight glass and pressure relief valve 

Polished  Rec Port Intake Manifold w pop off valve -

Gaskets-Studs kit-

Uses your balancer-  OR  You can get a hub  or Innovators West Harmonic Balancer from us -  Be sure we know if it is internal or external balanced

  2V Belt  accessory  pulley -   OR   your choice  or choose Serpentine if you like

8mm Polished Drive system - any ratio we decide on  from 20% under to 25% over 

( custom for your engine )

Blower Shop  Snout assembly-  Snout Mounted Idler Assembly

Polished carb. Top for 1x 4150 or 2 x 4150or no TOP PLATE  if you choose an injection hat 

Ready to Install

should  make about 20  lbs boost on a 454-455   cu in at  10% overdrive    

24-25   lbs at 20% overdrive   

We stock Innovators West Harmonic Balancers & RCD Blower Hubs

You can choose to run without a balancer since the blower belt absorbs the harmonic vibrations. 

Some engine Builders however  insist on a Balancer, so we like to do what they want.  

Balancers begin at $565 and go up depending on keyway, and if you need crank trigger  magnets

. Hubs are around $220  and up - they are all double keyway.