New Product Lines- Moroso & Engler Fuel Injection coming Soon- HILBORN Parts in Stock-The Blower Shop's Largest Dealer-RCD Engineering -APD Carbs largest Stocking Dealer
Product Search

    Secure Checkout
    8534 MSD kit Distributor - MSD Chrysler SB 273-318-340-360 MoPar
    8534 MSD kit Distributor - MSD Chrysler SB 273-318-340-360  MoPar

    Thumbnail Filmstrip of 8534 MSD kit Distributor - MSD Chrysler SB 273-318-340-360 MoPar Images

      Purchase 8534 MSD kit Distributor - MSD Chrysler SB 273-318-340-360 MoPar

      SKU: MSD-8534-6ALPKG
      Distributor - MSD Chrysler SB 273-318-340-360 MoPar Pro-Billet Distributor with 6AL Complete Kit

      $965.00

       
       



      Small Block  273-318-340-360   Chrysler/Plymouth/Dodge
      8534   6AL kit  

      RED   w BLACK option  

      Included is an MSD Digital 6A-L Ignition Box (6425), Pro-Billet Distributor (8534 ), 8.5mm Super Conductor Wire Set (32739), Blaster 2 Ignition Coil (8202), and an MSD Coil bracket (8213). Alkydigger's  -
        complete kit to take the guess work out of choosing the right components for your performance Small Block    engine.        . 

       

      Digital 6AL Ignition Box - Part #6425

      MSD started with a clean slate and drew up plans for an all new housing. They kept the same footprint as the traditional 6AL but lowered the profile for a sleek look. 

      The wiring is all routed out one end of the unit through a sealed and locking connector. This eases installation and keeps your wiring looking neat and clean. The rev limiter was moved right on top of the housing for easy access to the two rotary dials to set the limit in 100 rpm increments.

      Inside the Digital 6AL you’ll find a microprocessor that monitors and controls every firing and rev limit. The circuits are updated with efficient components that help the ignition

       produce more power while drawing less current! In fact, the new Digital 6AL delivers over 530 volts to the coil with up to 135mJ of spark energy for every firing! Increased output combined with MSD’s proven multiple spark series is a win-win situation!

      The new Digital 6AL are supplied with the wiring harness and the components you’ll need for installation. The 6AL is also supplied with vibration mounts. Both ignitions are compatible on 4, 6 or 8-cylinder engines with 12-volt, negative ground electrical systems. They’ll accept trigger inputs from breaker points, amplifiers and magnetic pickups.

      Pro-Billet Distributor - Part #8534

      This is MSD's most popular performance distributor! The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high rpm stability, a .500” steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSD’s adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application.

      8.5mm Super Conductor Wire Set - Part #32739

      The MSD 8.5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12" length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, MSD uses a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. These wires have a Multi-Angle bendable end at the spark plug. A coil wire is included as well.

      We can also supply you with a universal set where you cut and make the wire lengths yourself. If you need this set instead (part #31199), please let us know in the notes section when buying. These wires will come with Multi-Angle at the spark plug.

      Blaster 2 Performance Ignition Coil - Part #8202

      If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. All of the Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the Blaster Coil available. All of them have the same internal specifications, but have different housings or components. Each Blaster Coil can be used with a stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control.

      Universal Ignition Coil Bracket - Part #8213