Some refer to this as a "pump saver" since it prevents deadheading.
This consists of 3 (three) fittings and a stainless loop to go to the third leg of a three way shut-off valve.
A #6 fitting on the inlet for the loop to connect to, the main inlet fitting, and a #6 fitting for the other side.
This DOES NOT include the pump or shut-off valve although we do stock those as well. Shut off is a 85110 for -6 size 85210 for -8 size
This will allow you to push the shut-off while the engine is still in a high RPM state without the fear of super high pump pressure occuring.
The fuel will be forced out the side fitting and back to the inlet.
You can run it on the street or track. It can fit a Hilborn 150 pump if you tweek it enough - there is about 3/16" difference in length and you have to bend the loop and adjust the fittings to make it work on a Hilborn
Saves you from having to run another #6 bypass line to your tank.
Please select whether you want a #8, #10, or #12 inlet fitting.
We also stock this for the 110-990-1100-1200-600-760 Enderle and the 175 Hilborn pumps.