SKU: EN-1004-HiBoost-NITRO
Enderle Birdcatcher BLOWN Alky/NITRO 16 nozzles Complete w Pump, Drive, Pills - Flowed Port nozzles

Enderle Blown   Birdcatcher injector Kit  is complete with:

16 injectors   can set up for up to from 20% to  50% NITRO  

• Hat injector   w RED, Black, or Blue  Butterflies.  
• 4-3/8" Butterflies
• barrel valve BILLET   K Barrel Valve  with check valves 
• Fuel lines
• nozzles & bodies for hat
• check valves
• distribution block
• 5" or 6" Billet Extension or Belt drive 
  
• bypass pills
• Belt Drive or Timing Cover Drive - avail ( No Timing Cover  for BB MoPar but can do a Gear Drive  at optional Price 
• 
  
• Waterman LIL  Bertha Pump  14-25  gpm flow  -16 inlet- We will choose for Nitro % 
• Port nozzle kit   with 8  nozzles, lines 
• Shut off valve -8 with   -16 Inlet
• shut off cable and bracket kit
• FREE tuning advice
• Fuel Filter for after the pump
• optional Gear Drive 
  

Enderle's blown  Birdcatcher injector is complete setup  for 370-650 cu in engines with boost over 20 lbs  and up to 50% of Nitro 

Available for :

BB Chevy, SB Chevy,  LS  chevy BB MoPar,* Early Hemi  , BB Ford, LS Chevy   SB Ford, - be sure to SPECIFY

Choose progressive linkage or straight mechanical  

with progressive - it opens two butterflies and the third one can

open at any point  or even stay closed-  you adjust it how you like it 

• Injector- w barrel valve -fuel lines -nozzles & bodies -check valve -distribution block -bypass 
•  
• Belt Drive for fuel pump or Timing Cover Drive *
• T Cover is BB or SB Chevy , SB Ford, BB Ford, 
  

Our Casting Disclaimer:

 Enderle Scoops and Hat Injections are made from older casting molds that are original molds and are cast in very limited quantities.

There are casting flaws that have been there from the beginning and will always be there.   We cannot do anything about this and the manufacturers will not.   

 In addition, as time has gone on, many foundries have closed, leaving the castings to be done by very small Mom and Pop foundries.  It is most common to see pits and small imperfections which either will not buff out or would cause too much damage to the casting to try to buff it out. 

We do not give refunds, allowances, re-buffing jobs, or swap outs for other injectors.