My Cart: 0 item(s)
Thumbnail Filmstrip of Chevy SB Blower Package - 10-71 high helix TBS Complete 8mm Drive Hub, 1V Accessory Blower Package Images
2033 Billet Polished 14-71 Stripped for Gas, or Alcohol, high helix , center discharge. w Sight glass and pressure relief valve
Blower Shop Rec port intake manifold w pop off valve
Gaskets -Studs kit -
1V accessory pulley - or 2V your choice
8mm Polished Drive system - any ratio we decide on from 20% under to 25% over ( custom for your engine )
Polished manifold with pop off , studs, gaskets.
Blower Shop Snout assembly
Snout mounted or Blower mounted idler assembly.
Polished carb. Top for 1x 4150 or 2 x 4150 or 1 -4500 or 2-4500
you will need a Big Block Crank Snout , Or a crankshaft support if you have a standard snout .
Ready to Install
* will require either a Crab cap distributor, or a 4" Blower spacer to allow the blower to clear the distributor. We can also move the distributor/magneto to the front of the engine and /or use our Dunn Offset drive to relocate the magneto.
2039 Billet 10-71 stripped for Gas or Alcohol or E-85 -V opening with rectangular opening ( Modified delta ) for good cooling and boost . * Street or Light Racing - for all out alcohol racing - look at 2033 or 2036
We stock Innovators West Harmonic Balancers and RCD Blower Hubs
You can choose to run without a balancer since the blower belt absorbs the harmonic vibrations. Some engine Builders however insist on a Balancer, so we like to do what they want. Balancers begin at $450 and go up depending on keyway, and if you need crank trigger magnets. Hubs are around $190 and up - they are all double keyway.