Product Search

    Secure Checkout
    Surge Tank - with fuel pump and Belt drive  EFI or Mechanical - No Cable setup  Needed

    Thumbnail Filmstrip of Surge Tank - with fuel pump and Belt drive EFI or Mechanical - No Cable setup Needed Images

      Purchase Surge Tank - with fuel pump and Belt drive EFI or Mechanical - No Cable setup Needed

      SKU: SurgeTank3000
      Large Surge Tank - with fuel pump and drive Fuel Pump, Belt Drive setup for up to 3000 HP - - Underhood Mounted Mechanical Fuel Injection comes with Float and relay

      $2,790.00

      Surge Tank-Turbo Engine option:
       
      Place your social sharing code here.


      Surge Tank-Belt Drive- Fuel Pump 

      Mechanical Injection on the Street or Race  when using a  Rear Mounted Tank Racing  - For  rear tank vehicles, and Road Race cars.  Use your electric pump to fill up the surge tank, then the injection pump draws it's fuel from the surge tank.  Works with EFI systems using mechanical pump to prevent having to use a cable drive rear mounted pump. 

      Can use Gasoline- E-85-E-98- Methanol  *

      Should drain the methanol out  after each use *

      Billet Construction -100% Welded

      Comes with  12 Volt Relay  for wiring up the float to the fuel pump - 

      Billet  18-20  gpm  Waterman  Fuel Pump supports  up to 2750 HP on Methanol, E-85  or   a 20-25   pump can support over 3500  hp on methanol  

      the Twin Gear Billet pump - is Rugged, and  Should run for years

       Enderle Belt Drive For Fuel Pump *

      SB Chevy, SB Ford , BB Chevy, BB Ford, BB MoPar   LS Chevy

       

      *Can be filled from the top or bottom

      Internal Stainless float will turn electric pump on and off as it fills

      Allows you to use an  rear  electric pump to move fuel to the front so that a mechanical injection system pump can be used without starving for fuel.  *

      Hooking it up without a relay can destroy the float-   no guarantee for floats that are shorted out- we test each one when installing it .

      Has two (2) built in return ports for your by pass valves to return the fuel to.

      Has a large breather vent port on top.

      Float is easily removed to service, clean, or replace if needed.

       

      Holds approximately 2.60 gallons.  It is constantly being fed by your rear electric pump and your return fuel from the regulator is going back to the surge tank , so it stays full always 

      5" Wide x 8" Wide  x 14" Tall   Rectangular

      Has optional  billet mounts that are able to be moved for convenient mounting.

      Highly recommend venting this tank back to the main tank  in the event of an overflow it will then overflow back to the rear tank-    you can install our rollover vent in the tank, but could suffer fuel overspill if the float ever sticks.

      Alkydigger Inc. Not responsible  or liable for damage or fire done to any vehicle as a result of high performance parts that are sold on this site.  

      Racers and Users understand that racing and rodding can be dangerous, and result in personal damage, and accept that responsibility


      https://www.alkydigger.net/proddetail.php?prod=WAT-21766