SKU: TBS-2051-200-SB
TBS-2051-200 14-71 Chevy SB Blower Package High Helix 18 Point Teflon E-85 , Methanol - NO GAS

 Blower Shop 14-71 Complete Small  Block Chevy Special  2051 14-71 w 200 Rotors  Hi Helix 

Includes:

2051  Billet  Polished  14-71 Stripped  E-85 or  Alcohol,  high helix , center discharge. 

w Sight glass and pressure relief valve 

 Blower Shop Rec port intake manifold w pop off valve

Gaskets -Studs kit -

1V accessory  pulley - if desired  

8mm GT Pulleys and  Carbon Belt 

Drive system - any ratio we decide on  

Polished manifold with pop off , studs, gaskets.  competition Manifold Available  as an option 

Blower Shop  Snout assembly

Snout mounted  or Blower mounted idler assembly.

Polished carb. Top for Dominator  or 2- 4150 or dominators  

Recommend  a Big Block Crankshaft  Snout , or a Crankshaft Support  if you have a Standard  Snout .

Ready to Install

* will require either a Crab cap distributor, or a 4" Blower spacer  to allow the blower to clear the distributor.   

We can also move the distributor / magneto to the front of the engine and /or use our 

Dunn Offset drive to relocate the magneto. 

2051 Billet 14-71 stripped for Alcohol  or E-85   -V opening with rectangular opening ( Modified delta )  

for good cooling  and boost .  *  

 Light Racing -    for all out alcohol racing - look at 2056, , 2057, or 2118    or 2115 XR! 

We stock Innovators West Harmonic Balancers and RCD Blower Hubs

You can choose to run without a balancer since the blower belt absorbs the harmonic vibrations. Some engine Builders however  insist on a Balancer, so we like to do what they want.  Balancers begin at $515 and go up depending on keyway, and if you need crank trigger  magnets. Hubs are around $220and up - they are all double keyway.