CLIENT LOGIN | ORDER STATUS | TRACKING
(Picture is for illustration only)
Complete Blower Setup- for LS engines- with Billet 8-71 Blower
Specify LS1- LS2- LS3- LS6- LS7 - LSX ( Rectangular or Cathedral ports )
8 -71 Blower # 2222 or 2220 Stripped for gas-E-85 or Alky
- Billet Polished Case, Billet Rotors, Polished Billet Front Cover & Billet Bearing Plates
Polished Intake- The Blower Shop
3" Wide 8MM Drive Kit Complete
Polished Carb Adapter Plate
6 point teflon stripping optional 18 point for methanol, E-85 , or higher boost
LSX 454 Crate Engine will require our Innovators West Balancer or our RCD Blower Hub *
We stock Innovators West Harmonic Balancers and RCD Blower Hubs
You can choose to run without a balancer since the blower belt absorbs the harmonic vibrations. Some engine Builders however insist on a Balancer, so we like to do what they want. Balancers begin at $450 and go up depending on keyway, and if you need crank trigger magnets. Hubs are around $190 and up - they are all double keyway.
LS7 8-71 takes a week longer to produce.
These products are recommended with this item
Polished aluminum Dual Carb Scoop- w Air filters - #4150
Does Not fit Dominators *
Enderle Partial Blown Alcohol Bugcatcher Injector - Ribbed top -
Bugcatcher Butterfly Blanks for EFI Conversion- Block offs-
Need one for most engines- Need to block off two for small block engines and very moderate Big Blocks - Requires Tig Welding
Helps prevent butterflies being sucked shut when running a blower
SFI 18.1 Harmonic Damper for LS1, LS2, LS3, LS6 Corvette, Pontiac G8 & Cadillac CTS-V w/Crank Bolt. Features 6 Rib drive & Std. Dia. Pulley.
This damper comes standard with 3/16" Keyway for use with aftermarket crankshafts.
We stock these with Double 3/16" keyways -
We can Use Step keys to create a double 1/4" or a 1/4" + a 3/16" if needed.
If you want to pin it instead of using the keyways- just fill the keyways with silicone .
Billet Holder for your TPS switch on a Injector Hat
Helps with your EFI project
NEW Enderle Bugcatcher - with 8 injector Nozzle Plate and TPS Block and Switch w harness -build your own. Does Not include the Blower
Enderle-Holley Bugcatcher Setup for Blower -Complete EFI Kit- Fuel pump- dual filters- Sensors- wiring-ECU- Software- READY to Go *
These are our current best sellers.
NEW Hilborn Jets (Pills) Sizes .030 - .210----- Precision laser Drilled
Screen Gasket for GMC Type Blower
6-71, 8-71, 10-71, 14-71
Gasket for GMC Type Blower
6-71, 8-71, 10-71, 14-71
3rd picture shows a selection we sell 7009.asst
for Port Nozzles and All Unblown engines use - 7007-P
8AN Body This is a -8AN Shut off comes standard with -8 bulkhead fitting, we can put a flare fitting in it if you want .....just let us know how you want it
10 AM - 5 PM M-F CST
Sales & Orders: Toni, Shannon, Mike
Tech Questions returned when time permits