CLIENT LOGIN | ORDER STATUS | TRACKING
Surge Tank-Belt Drive- Fuel Pump
Mechanical Injection on the Street or Race when using a Rear Mounted Tank Racing - For rear tank vehicles, and Road Race cars. Use your electric pump to fill up the surge tank, then the injection pump draws it's fuel from the surge tank. Works with EFI systems using mechanical pump to prevent having to use a cable drive rear mounted pump.
Can use Gasoline- E-85-E-98- Methanol *
Should drain the methanol out after each use *
Billet Construction -100% Welded
Comes with 12 Volt Relay for wiring up the float to the fuel pump -
Billet 9.75 to -12 gpm Waterman/ Aeromotive Fuel Pump /Enderle
Fuel Pump supports 1700 HP on Methanol, E-85 or GAS
the Spur Gear Billet pump - is Rugged, and Should run for years
Enderle Belt Drive For Fuel Pump *
SB Chevy, SB Ford , BB Chevy, BB Ford, BB MoPar , LS
*Can be filled from the top or bottom
Internal Stainless float will turn electric pump on and off as it fills
Allows you to use an rear electric pump to move fuel to the front so that a mechanical injection system pump can be used without starving for fuel. *
Hooking it up without a relay can destroy the float- no guarantee for floats that are shorted out- we test each one when installing it .
Has two (2) built in return ports for your by pass valves to return the fuel to.
Has a large breather vent port on top.
Float is easily removed to service, clean, or replace if needed.
Holds approximately 2.1 gallons.
5" Wide x 8" Wide x 13" Tall Rectangular
Is constantly being filled from your electric pump, as well as your returned fuel.
Has optional billet mounts that are able to be moved for convenient mounting.
Highly recommend venting this tank back to the main tank in the event of an overflow it will then overflow back to the rear tank- you can install our rollover vent in the tank, but could suffer fuel overspill if the float ever sticks.
Alkydigger Inc. Not responsible or liable for damage or fire done to any vehicle as a result of high performance parts that are sold on this site.
Racers and Users understand that racing and rodding can be dangerous, and result in personal damage, and accept that responsibility
These products are recommended with this item
These are our current best sellers.
NEW Hilborn Jets (Pills) Sizes .030 - .210----- Precision laser Drilled
Screen Gasket for GMC Type Blower
6-71, 8-71, 10-71, 14-71
Gasket for GMC Type Blower
6-71, 8-71, 10-71, 14-71
3rd picture shows a selection we sell 7009.asst
for Port Nozzles and All Unblown engines use - 7007-P
8AN Body This is a -8AN Shut off comes standard with -8 bulkhead fitting, we can put a flare fitting in it if you want .....just let us know how you want it
10 AM - 5 PM M-F CST
Sales & Orders: Toni, Shannon, Mike
Tech Questions returned when time permits