EFI - MoPar Hilborn Complete for 440 Chrysler 361, 383, 413, 440, 426, "Complete" Electronic Fuel Injector "B" Block engines - Not Hemi

Available approx. May 2021

Complete - Ready to install less the main supply hoses

Big Block MoPar)  Chrysler Based Engines - 2-7/16" Bore   361, 383, 413, 426, 440 

Complete with Self managing software - Fuel pump, Regulator, Wiring, Injectors-   DVD instructions

Specify port Height-  

Max Wedge = approx. 2-5/8"

Standard Ports = approx. 2-3/8"

Streetable - supports up to 850  hp. 

takes 4=6 weeks to deliver usually

The Wedge, Chryslers way of saying this isn’t the Hemi, but that didn’t matter as these conventional style cylinder head engines hold their own in the high performance arena. These engines came in different sizes and in some instances with some pretty wild induction systems. Now available from Hilborn is the wildest of them all. Redesigned to incorporate our current curved throat design for increased engine efficiency and performance, this injector can also be had with your choice of a wedge or the max wedge port size. Experience the true power potential and all of the drivability a Hilborn injector can offer your wedge engine today.

Why is a Hilborn better?
Since a Hilborn Injector is part of the IR (individual runner) family it does not suffer from the disruptive cylinder to cylinder pulses associated with a common plenum intake. These pulses promote fuel separation from the air carrier, the slowing of air movement in the manifold, and the inability to realize engine potential due to poor burn characteristics in the combustion chamber. The IR design of the Hilborn isolates these pulses allowing the engine to make more bottom end torque, have increased throttle response and most importantly allow the engine to accelerate faster. Most applications will also see a significant increase in top end power. These same attributes also allow smoother low speed drivability.

Besides, nothing looks better than eight stacks sitting on top of your engine. Have the best of both worlds with a Hilborn!
Proudly made in the USA!  Each unit built for your specific engine.    Call Mike  or Toni and they will do the work for you .  615-457-3192  

Hilborn Fuel injection is proud to offer the Holley line of ECUs and fuel injection components. Focusing on the Holley HP, this ECU offers premier fuel and spark control, while also giving the user the option to tune with or without a laptop. In addition, advancements in self learning make the Holley HP one of the easiest ECUs to use, while still providing all of the control required by the professional.

Holley’s advanced self learning system is one of the best that we’ve seen and can tune IR manifolds such as a Hilborn without trouble. Even applications with aggressive camshafts can successfully take advantage of Holley’s self tuning programming.

The choice is yours! The Avenger Hand Held from Holley allows those who are anxious about lap tops control the ability to access the major parameters of the ECU using intuitive menus with a simple click to change programming. When purchased as a Holley/Hilborn IR EFI system, a base calibration custom designed for your application will already be downloaded to your ECU. With the hand held controller, adjustability of the HP ECU is right at your finger tips.

Standard Features: