Facebook TwitterPinterest
 Checkout
Idle Air Control    IAC  for EFI injections to allow much better idle tuning -  Remote Mount
  (Enlarge)  
Part # FST307016
Idle Air Control IAC for EFI injections to allow much better idle tuning - Remote Mount

Idle Air Control  Should be used on all EFI systems 

The IAC (Idle Air Control) valve uses a small electric motor to vary engine idle rpm to exactly where you set it at in your ECU parameters.

  • Includes FAST™ Part# 307014 GM TPI Style Idle Air Control valve with air filter
  • Used for Remote Mounting IAC Valve
  • This is a remote unit, so mount it where you like and use a hose to connect to your vacuum source. 
Price: $219.00
Quantity:

These products are recommended with this item

Part # EFI-BUG-KIT.external
.Bugcatcher Partial with 8 Injector  Fuel Rail  Plate and TPS Block  & Connector EFI
1 of 4

Finish - Bugs
Simulated Carbon Fiber Coating (+$495.00)Black Powder Coat (+$250.00)
Hardline
Mechanical Hardline Kit (+$375.00)
Choose Set of Injectors by lbs. per hour
30 lbs/hr 350 hp (+$800.00)
36 lbs/hr 450 hp (+$800.00)
40 lbs/hr 500 hp (+$800.00)
48 lbs/hr 550-600 hp (+$800.00)
55 lbs/hr 600-750 hp (+$800.00)
60 lbs/hr 800 + 900 (+$880.00)
80 lbs/hr 850-950 hp (+$880.00)
95 lbs/hr 950-1050 hp (+$880.00)
120 lbs/hr 1100-1300 hp (+$990.00)
Price: $2,249.00
Part # EFI-BUG-KIT.hidden
.Bugcatcher Partial with 8 Injector HIDDEN    Plate and TPS Block  & Connector EFI
1 of 5

Finish - Bugs
Simulated Carbon Fiber Coating (+$495.00)Black Powder Coat (+$250.00)
Hardline
Mechanical Hardline Kit (+$375.00)
Choose Set of Injectors by lbs. per hour
30 lbs/hr 350 hp (+$800.00)
36 lbs/hr 450 hp (+$800.00)
40 lbs/hr 500 hp (+$800.00)
48 lbs/hr 550-600 hp (+$800.00)
55 lbs/hr 600-750 hp (+$800.00)
60 lbs/hr 800 + 900 (+$880.00)
80 lbs/hr 850-950 hp (+$880.00)
95 lbs/hr 950-1050 hp (+$880.00)
120 lbs/hr 1100-1300 hp (+$990.00)
Price: $1,849.00
Part # HIL671GMC-E-Partial
.EFI Hilborn Four Port "E Style "  Injector for  Blowers - PARTIAL, with TPS and Hidden Plate -  No electronics
1 of 8

Powder Coat
Powder Coated (+$400.00)
Hard Line
Mechanical Hard Line Kit (+$455.00)
Carbon Fiber or Black
Carbon Fiber Dip Coating (+$595.00)Black Powder Coat (+$300.00)
Idle Air Control Valve
FAST IAC add on (+$259.00)
Price: $3,029.00
Part # HIL-671H.EFI.8
.EFI- Hilborn Shot Gun 2-Hole   Hat Style Injector with 8 External plate w Fuel Rails  for 6-71 and 8-71 blowers PARTIAL
1 of 4

Mechanical Hardline Kit
Mechanical Hardline Kit (+$455.00)
Carbon Fiber or Black
Carbon Fiber Dip Coating (+$595.00)Black Powder Coat (+$300.00)
Price: $3,190.00
Part # HIL671GMC-H(3-5/8)EL-PART
.EFI- Hilborn Shot Gun 2-Hole   Hat Style Injector with HIDDEN PLATE  for 6-71 and 8-71 blowers PARTIAL
1 of 7

Mechanical Hardline Kit
Mechanical Hardline Kit (+$455.00)
Carbon Fiber or Black
Carbon Fiber Dip Coating (+$595.00)Black Powder Coat (+$300.00)
Price: $3,065.00
Part # JB001
CLOSEOUT-   EFI Nozzle Injector Plate - Hidden Injector Plate
1 of 3

Choose Set of Injectors by lbs. per hour
30 lbs/hr 350 hp (+$800.00)
36 lbs/hr 450 hp (+$800.00)
40 lbs/hr 500 hp (+$800.00)
48 lbs/hr 550-600 hp (+$800.00)
55 lbs/hr 600-750 hp (+$800.00)
60 lbs/hr 800 + 900 (+$880.00)
80 lbs/hr 850-950 hp (+$880.00)
95 lbs/hr 950-1050 hp (+$880.00)
120 lbs/hr 1100-1300 hp (+$990.00)
List Price: $650.00
Price: $499.00
Part # HIL-EFI301P
EFI   Blower Injector  polished Plate for Blowers 6-71 8-71 10-71 Hilborn
1 of 3

EFI-301-303-304
Black anodized (+$100.00)
Price: $900.00
Part # HLY17-92.8
EFI  Blower Spacer Plate   with 8  89 lb injectors to support 1000 HP - EFI  Supercharger -Blower -Injector Spacer with EFI Rails

Price: $1,399.00
Part # TBS-4335
EFI Billet  Injector Plate for Dual Throttle Bodies Using 8 Injectors with Fuel Rails Billet The Blower Shop
1 of 2

Price: $800.00
Part # TBS-4336
EFI Billet  Injector Plate for Hat Injection Using 8 Injectors with Fuel Rails Billet The Blower Shop

Price: $800.00
Part # JB001.inline
EFI Blower  Injector Plate - Hidden Injector Plate for Birdcatcher and Bugcatcher Injectors on 6-71 8-71 10-71Blowers
1 of 4

Injectors and Harness
6PPH Injectors & Harness (+$950.00)
95PPH Injectors & Harness (+$950.00)
Price: $700.00
Part # HIL-EFI304P
EFI Blower  Injector Plate for 16 Injectors for  6-71  to 14-71  Blower  Hilborn
1 of 4

EFI- Add 16- EFI injectors -GAS
Add 16- 50lb injectors for up to 1200 hp (+$1,100.00)
Add 16- 60 lb injectors for up to 1400 hp (+$1,300.00)
Add 16- 120 lb injectors (+$1,500.00)
EFI-301-303-304
Black anodized (+$100.00)
Price: $1,425.00
Part # HLY17-92
EFI Blower  Spacer Plate  - EFI  Supercharger -Blower -Injector Spacer with EFI Rails

Price: $632.95
Part # JB005-9
EFI Blower Injector Plate - Hidden Injector Plate for Big and Ugly and Shotgun Injectors on 6-71 8-71 10-71 14-71 Blowers
1 of 6

Add 2 injector holders for BAU
2 Holders, hoses, fittings (+$190.00)
Price: $650.00
Part # JB-438
EFI Conversion and Block off Plugs   Big and Ugly BAU Butterfly Block Off Plates 4-3/8"
1 of 5

Price: $140.00
Part # JB-31116
EFI Conversion and Block off Plugs  Big and Ugly BAU Butterfly Block Off Plates 3-11/16"
1 of 5

Price: $140.00
Part # JB-500
EFI Conversion andblock off plugs Big and Ugly BAU Butterfly Block Off Plates 5"
1 of 5

Price: $140.00
Part # JB-2B
EFI Conversion Birdcatcher Block Off Plates- to Reduce air Flow
1 of 3

Price: $40.00
Part # JB-556
EFI Conversion Block Off Plugs  Big and Ugly BAU Butterfly Block Off Plates 5-9/16"
1 of 5

Price: $150.00
Part # JB-1B
EFI Conversion Bugcatcher Block Off Plates- to Reduce air Flow
1 of 2

Price: $35.00
Part # HIL-EFI303
EFI spacer  Injector Plate for 8  injectors  Blowers 6-71 8-71 10-71 Hilborn with Fuel Rails
1 of 3

Inlet Fitting
#8
#10
EFI- add 8 60 lbinjectors = 800 hp
Add 8- 60 # injectors = 800 hp (+$720.00)
Add 8- 89 lb injectors = 1000 hp (+$820.00)
Add 8- 95 lb injectors = 1100 (+$880.00)
8- 120 lb injectors= 1300 (+$960.00)
List Price: $1,150.00
Price: $799.00
Part # EFI-Bird-KIT.hidden
Enderle Birdcatcher w Progressive linkage Partial with 8 Injector HIDDEN    Plate and TPS Block  & Connector EFI
1 of 4

Choose Set of Injectors by lbs. per hour
30 lbs/hr 350 hp (+$800.00)
36 lbs/hr 450 hp (+$800.00)
40 lbs/hr 500 hp (+$800.00)
48 lbs/hr 550-600 hp (+$800.00)
55 lbs/hr 600-750 hp (+$800.00)
60 lbs/hr 800 + 900 (+$880.00)
80 lbs/hr 850-950 hp (+$880.00)
95 lbs/hr 950-1050 hp (+$880.00)
120 lbs/hr 1100-1300 hp (+$990.00)
Price: $2,199.00

These are our current best sellers.

Part # ADTSHIRT-SP
Alkydigger
ADTSHIRT-SP
Alkydigger's Black Screen Print T Shirt Cotton
1 of 2

  
  
  
  
  
  
  
Price: $20.00
Part # EN7007-E
Enderle
EN7007-E
Enderle Nozzle Ends  Reamed  "Flowed"  - For Un-Blown Engines- MATCHED  for Enderle Nozzle Bodies
1 of 3

Price: $9.50
Part # EN7007
Enderle
EN7007
Enderle Nozzle Ends- "Drilled"  for mostly  Blown Engines- for  Enderle Nozzle  Bodies
1 of 3

List Price: $6.29
Price: $5.50
Part # EN7009
Enderle
EN7009
Enderle Pills Jets  Bypass Jets (Pills) .020-.190

Price: $4.25
Part # HILF565
Hilborn
HILF565
Hilborn Pills Jets  Bypass Jets (Pills) .030-.210

Price: $5.00
Part # HILHOSES1
Hilborn
ADHOSES1
Hoses  Hilborn  , Ron's  , Kinsler  Straight Hoses 5" to 30" Lengths
1 of 3

Price: $23.00

Alkydigger
307 White Bridge Pike
Nashville, TN 37209

9:30 AM - 5 PM M-F CST

Sales & Orders: Toni, Shannon, Mike

Tech Questions returned when time permits
Email Tech

FAX: 615-873-1876

Email Us


Customer Gallery
Customer Gallery

Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout
Login Status  Login Status

Not logged in

» Login