Foremost Blower Teflon Gel Lube for Supercharger rotors- Protect Stripping against Dry Start ups

Blower Lube  Formost  Brand  Made in USA 

 Foremost  Supercharger Gel Lube provides a better performing supercharger by addressing Teflon wear and leak path control.   Same as "Prizim" 

While extended Teflon / Nylatron wear through proper lubrication extends supercharger performance longevity, the gel’s ability to cling to the rotating rotors and internal parts also increases the efficiency of the unit by filling up the clearance between moving parts.

It tightens the seal between rotor to rotor, and end frame to rotor clearance thus allowing the supercharger to increase efficiency by reducing leak paths. This also reduces costs by decreasing time between overhauls.

The gel lube is not affected by methanol like many supercharger lubes, therefore provides a better, longer lasting seal.

The lubricant was designed to hold up to most all solvents and methanol, allowing the lube not to be washed away from the rotors, rotor bores and internal supercharger surfaces. Because of this it requires a “remover” to cut the supercharger gel at time of re-stripping.

It is important to remove all traces of the lube from the Teflon grooves so that the Teflon does not pitch itself out of the rotors after overhaul because of any remnants of the slippery lubricant.

We suggest that it is applied once a day, usually on first start up.

Please note that this item can only be shipped by Ground Service due to FAA regulations.