SKU: EN-6010-ASSY
6010 Enderle -8 AN Carburetor Check Valve with -8AN Mount for All Alcohol Carbs

  6010 Carburetor by pass valve for Alcohol Carbs  with -8 Mount to go directly into most mechanical fuel pumps or Carb Logs.  

Enderle  brass AN8 inline check valve for alcohol carburetors with -8AN Adapter  to allow the valve to be mounted to a -8 fuel pump   

 Helps  Eliminate the need for a regulator    ( see our 13209  and 13214  two stage regulators ) 

comes with 4 pills :  ..  .160  .170  .180   .190 

Available pressures: 6 lb., 8 lb., 10 lb.  ( 6 # is most popular)
Pressure can be adjusted with springs and shims (sold separately).
 

Allows you to put a main bypass pill in the main line to regulate fuel flow.
Will work with all fuels.

Can be used for any pressure relief situation where a -8 valve is needed.

  Our carb  by pass valve ,   . http://www.alkydigger.net/proddetail.php?prod=EN6010ASSY    This allows the mechanical pump which usually produces 2 to 3 times the fuel needed for an alcohol carb to behave in accordance with the low pressure requirements of  the carb.     Since mechanical pumps were designed for high pressure, they have to be tailored for use with a Carb.   So low pressure, high volume is what they want.     By changing the jets “pills”   in the valve, you allow or keep a specific amount of fuel  available for the carb, and allow the rest to go back to the tank, or be looped back to the fuel pumps  inlet, which is the same as returning it to the tank.

Aeromotive regulators  that work well :  13209    13214