CLIENT LOGIN | ORDER STATUS | TRACKING
Enderle 110 Fuel Pump - 13.2 GPM
Handles up to 1400 hp approx. or 22 lbs boost
for next size look at 990 pump or our Double Gear SG810 pump
Good pump for turbo and Pro Chargers up to 1800 HP ..
Moderate size blown alcohol engines from 400-575 with 22 lbs boost or less . Will work well on anything with a 6-71 or 8-71 blower
This is designed for either cam or belt drive installations.
Features an adjustable collar that allows for rotation once mounted.
Has an inlet with AN12 female threads and AN8 on the outlet.
This pump flows 13.2 GPM.
These products are recommended with this item
NEW 4 Way Shut Off Valve #8-
One port remains open all the time to feed a Hilborn or Kinsler type by pass valve or High speed valve
NEW 2 Way Shut Off Valve -8- In -Out with no pump saver provision
see 3 way for return loop
Engineered to be driven by a pulley and cog drive allowing the pump to be driven from your crankshaft. Flows in excess of 4500 lbs/hr (over 12 GPM at 100 PSI). Supports over 5000 HP gas, 2500 HP methanol.
The Hex Drive Fuel Pump features a hex drive shaft and mounting collar designed to be mounted and driven directly from the back of a properly prepared external oil pump or driven directly by the cam through a timing cover adapter.
Replacement Bearing for the Enderle 110 and 80A body fuel pumps with 15MM Shaft ( .600" )
Old pumps with a carbon seal cannot be re sealed - look under your rotor and if has no seal, you cannot re seal it .
SPECIFY if 80A 8 bolt cover or 110 style 6 bolt cover
Belt Drive for Small Block Chevy Engines with Mandrel
Belt Drive for Big Block Chevy Engines with Mandrel (1" to accommodate dry sump or vacuum )
Belt Drive for Big Block Ford 429-460 Engines -works w Kinsler-Hilborn-DSR-Ron's-Waterman
Belt Drive for Small Block Chevy Engines to drive the fuel pump off to the side of the engine.
Chevy 3-Hole Harmonic Balancer Bolt Pattern
https://youtu.be/vaSqP-UeBfg?t=589 brief Video that may help installation
Belt Drive for Big Block Chevy Engines-* This kit works well for other GM Engines where no belt drive is available
Pump mounting bracket with 5/8" Pulley Shaft, bearings, ready for your pulley
Chevy Small Block Crank Hub Spacer
5/8" Shaft 32 Tooth
Pump, Nostalgia, Std Rotation, Slip Collar, 3/8 Hex, Steel Center, .550
Pump, Nostalgia, Std Rotation, Slip Collar, 3/8 Hex, Steel Center, .600" gears
Pump, Nostalgia, Std Rotation, Slip Collar, 3/8 Hex, Steel Center, .500
Loop System for Enderle 110-600-760-990 Fuel Pumps Hilborn 175 too .
Pump saver- Prevents deadheading
.281" Bypass Orifice-Fully Adjustable- Top of the line Regulator - 2040 Weldon Regulator-
.438" Bypass Orifice
These are our current best sellers.
3rd picture shows a selection we sell 7009.asst
Gasket for GMC Type Blower
6-71, 8-71, 10-71, 14-71
Screen Gasket for GMC Type Blower
6-71, 8-71, 10-71, 14-71
10 AM - 5 PM M-F CST
Sales & Orders: Toni, Shannon, Mike
Tech Questions returned when time permits