CLIENT LOGIN | ORDER STATUS | TRACKING
Enderle 80A G-Rotor Fuel Pump - Dash 0 4.0 gpm - Reversible -Popular for smaller engines on Alky up to 383 or so - Any engine on Gas
80A-0 4.0 gpm at 4000 rpm- *
See full description for flow ratings
Reversable, for Belt Drive or Timing Cover Drive .
We buy some good used pumps- call us for details-
We flow pumps- Send yours in if unsure of its performance
The 80A pump is Enderle's workhorse.
It is used anywhere that you would use a Hilborn, 150 a Kinsler, or DSR 0 1/2 or 1 pump or Waterman 300 400 or 500
The principle difference in this and the Hilborn PG150C is that the Enderle pump has one outlet, whereas Hilborn has three.
To use an Enderle pump on a Hilborn or Kinsler setup, we must install a T-fitting on the outlet or install a four-way shutoff valve . which will allow the installation of the Hilborn or Kinsler bypass valve. Tell us or order a 4 way shut off or a Swivel T with a swivel on the Run.
This pump is reversible for use on TC or belt drive. Just let us know that you need it reversed!
Please choose your pump according to your flow performance needs: f you're not sure of your fuel pump needs, contact us for some help and we'll get you set straight!- Size matters big time 615-457-3192 MIKE or TONI
DO NOT RUN A BLOWN OR TURBO ENGINE LEAN TRYING TO SAVE $$$ ON A FUEL PUMP nothing is more expensive than doing it twice
These products are recommended with this item
-8AN inlet with 3 -6AN Outlets
-6 O ring to -6 AN Flare - Various uses
NEW 2 Way Shut Off Valve -8- In -Out with no pump saver provision
see 3 way for return loop
Belt Drive for Big Block Chevy Engines with Mandrel (1" to accommodate dry sump or vacuum )
Belt Drive for Small Block Chevy Engines with Mandrel
Belt Drive for Small Block Chevy Engines to drive the fuel pump off to the side of the engine.
https://youtu.be/vaSqP-UeBfg?t=589 brief Video that may help installation
Belt Drive for Big Block Chevy Engines-* This kit works well for other GM Engines where no belt drive is available
SB - BB Chevy Cam Drive Spud from - To work with Pete Jackson Gear Drive , KSE and some others
Only Fits Pete Jackson Gear Drive and other Gear Drives where the index hole is 3/4" dia and NOT 7/8"
Height 1 3/8" tall
Comes with shim pack to shim thrust - usually .005" .009"
SB - BB Chevy Cam Drive Spud- for use in Hilborn Timing covers - This spud will work in all timing covers, but the Enderle Spuds will not work in a Hilborn cover due to the Hilborn cover having a roller bearing.
426 Hemi and "B" Block Mopar Cam Spud
Enderle Small Block Ford Timing Cover - 221-260-289-302 351W
SKF Oil Seal for Enderle Timing Cover SB Chevy
Timing Cover for SB Chevy - 265-283-327-302-350-400
Comes with Seal # 17678
add optional Spud or Polishing
Inlet #8 for Enderle 80A or 150 Hilborn Pumps
Hilborn-Enderle Pump Fitting
Fits 150 Hilborn and Enderle 80A pumps 8AN o ring to 3/4" OD Slide on for Jr Fuel and others
These are our current best sellers.
#rd picture shows a selection we sell 7009.asst
Gasket for GMC Type Blower
6-71, 8-71, 10-71, 14-71
Screen Gasket for GMC Type Blower
6-71, 8-71, 10-71, 14-71
9:30 AM - 5 PM M-F CST
Sales & Orders: Toni, Shannon, Mike
Tech Questions returned when time permits