4500 Dominator Assassianator 2656 CFM 2.56" Progressive Butterflies - Billet Accufab Throttle Body

Assassinator  2656 CFM  Dominator Base Throttle Body

If you would like to switch from a carburetor intake to electronic fuel injection (EFI), Accufab/ Alkydigger  has developed the Four Barrel 6500 high flow throttle body to meet your needs. The Four Barrel 6500 will bolt directly to most 4500 series cast intake manifolds.  The base to top height dimension is 3" tall. This throttle body has no idle air control provision. Also, it's designed to use a Ford style 5.0L 1986-1993 Mustang pigtail style throttle position sensor, sold separately.

Also a bolt-on throttle body for any 4500 intake manifold, however, the intake plenum directly under the throttle body may need to be chamfered a little (with a hand grinder) to accommodate the air flow of the 2 1/2" throttle bores. Please note, some machining or grinding required to widen the upper area inside of a cast intake manifold plenum to clear the 2.56" diameter throttle body blades.

Better Air Flow for More Power. The Accufab 6500 series 4-barrel throttle body uses 2.56-inch bores and flows 2,656 CFM at 28-inches.

Exceptional Quality. The Accufab 6500 throttle body is made from 6061-T6 billet aluminum and polished to an eye-catching finish. Accufab's quality is second to none! Only the best components are used for unparalleled reliability and performance. Each throttle body weighs 4 pounds, compared to up to 13-pounds for a big 4500 series carburetor. Manufactured in the USA.

Application. This throttle body may be used with either EFI or mechanical fuel injection. For an EFI application, the throttle body is CNC machined to use a Ford Mustang 5.0L 1986-1993 throttle position sensor (TPS). However, Accufab has an optional accessory to help adapt this Ford style TPS provision to be used with GM electronics instead. For example, we offer a TPS adapter to use your GM TPS.

Accessories Included: 6500 throttle body base and round top gaskets.oould like to switch from a carburetor intake to electronic fuel injection (EFI), Accufab/ Alkydigger  has developed the Four Barr 6500 high flow throttle body to meet your needs. The Four Barrel 6500 will bolt directly to most 4500 series cast intake manifolds.  The base to top height dimension is 3" tall. This throttle body has no idle air control provision. Also, it's designed to use a Ford style 5.0L 1986-1993 Mustang pigtail style throttle position sensor, sold separately.

Also a bolt-on throttle body for any 4500 intake manifold, however, the intake plenum directly under the throttle body may need to be chamfered a little (with a hand grinder) to accommodate the air flow of the 2 1/2" throttle bores. Please note, some machining or grinding required to widen the upper area inside of a cast intake manifold plenum to clear the 2.56" diameter throttle body blades.

Better Air Flow for More Power. The Accufab 6500 series 4-barrel throttle body uses 2.56-inch bores and flows 2,656 CFM at 28-inches.

Exceptional Quality. The Accufab 6500 throttle body is made from 6061-T6 billet aluminum and polished to an eye-catching finish. Accufab's quality is second to none! Only the best components are used for unparalleled reliability and performance. Each throttle body weighs 4 pounds, compared to up to 13-pounds for a big 4500 series carburetor. Manufactured in the USA.

Application. This throttle body may be used with either EFI or mechanical fuel injection. For an EFI application, the throttle body is CNC machined to use a Ford Mustang 5.0L 1986-1993 throttle position sensor (TPS). However, Accufab has an optional accessory to help adapt this Ford style TPS provision to be used with GM electronics instead. For example, we offer a TPS adapter to use your GM TPS.

Accessories Included: 6500 throttle body base and round top gaskets.

 4500 sso, it's designed to use a Ford style 5.0L 1986-1993 Mustang pigtail style throttle position sensor, sold separately.

Also a bolt-on throttle body for any 4500 intake manifold, however, the intake plenum directly under the throttle bodyneed to be chamfered a little (with a hand grinder) to accommodate the air flow of the 2 1/2" throttle bores. Please note, some machining or grinding required to widen the upper area inside of a cast intake manifold plenum to clear the 2.56" diameter throttle body blades.

Better Air Flow for More Power. The Accufab 6500 series 4-barrel throttle body uses 2.56-inch bores and flows 2,656 CFM at 28-inches.

Exceptional Quality. The Accufab 6500 throttle body is made from 6061-T6 billet aluminum and polished to an eye-catching finish. Accufab's quality is second to none! Only the best components are used for unparalleled reliability and performance. Each throttle body weighs 4 pounds, compared to up to 13-pounds for a big 4500 series carburetor. Manufactured in the USA.

Application. This throttle body may be used with either EFI or mechanical fuel injection. For an EFI application, the throttle body is CNC machined to use a Ford Mustang 5.0L 1986-1993 throttle position sensor (TPS). However, Accufab has an optional accessory to help adapt this Ford style TPS provision to be used with GM electronics instead. For example, we offer a TPS adapter to use your GM TPS.

Accessories Included: 6500 throttle body base and round top gaskets.