CLIENT LOGIN | ORDER STATUS | TRACKING
Designed to allow you to prime your barrel valve or hat injector through the dist. block to make it start without a squirt bottle. Cannot be used in a vacuum area as it will cause the primer valve to be sucked open all the time . MUST be inserted into the actual fuel source in the distribution block, or barrel valve. Comes with a 12 v fuel pump appropriate size to prime the engine, A primer nozzle with a one way valve, 24" #4 Braided Hoses with AN fittings to connect it securely, Intermittent push button switch A 1 qt. tank with line and clamps. You will just need to wire it up! Will allow blower injectors and many stack injections to start without squirting with a bottle. Cannot be installed in a vacuum area. Must be in a pressure area.
These products are recommended with this item
5" Big and Ugly - with Barrel Valve - only for tunnel ram- approx 8 -3/4"" height ( Short )
With barrel valve, - optional: Billet K Valve Upgrade .
NO: Lines, Nozzles, dist Block.
5-9/16" Butterflies- Largest Allowed in NHRA - Tall model 10.5" -
See BAU2 model for the Shorter version BAU-1 Style = 10.5" Tall BAU-2 Style= 8-3/4" Tall
Call us if you want just the Bare manifold or ( Partial) to make an EFI unit with .
Great for Nostalgia Dragsters-Altereds-Street Gassers - 305 Race Saver Sprint Cars - COMPLETE SETUP
These are our current best sellers.
8AN Body This is a -8AN Shut off comes standard with -8 bulkhead fitting, we can put a flare fitting in it if you want .....just let us know how you want it
for Port Nozzles and All Unblown engines use - 7007-P
3rd picture shows a selection we sell 7009.asst
Gasket for GMC Type Blower 6-71, 8-71, 10-71, 14-71
Screen Gasket for GMC Type Blower 6-71, 8-71, 10-71, 14-71
NEW Hilborn Jets (Pills) Sizes .030 - .210----- Precision laser Drilled
615-457-3192
10 AM - 5 PM M-F CST Closed Weekends
Sales & Orders: Toni, Shannon, Mike
Tech Questions returned when time permits Email Tech
FAX: 615-873-1876