Shopping cart and checkout for Alkydigger - Alkydigger

Home » MECHANICAL INJECTION PARTS » Fittings,O Rings, Adapters
 
#6 AN to #6 AN Female Couplers for Mounting Valves
  (Enlarge)  
Part # AD-F1112

#6 AN to #6 AN Female Couplers for Mounting Valves

This aluminum adapter fits between the secondary by-pass valve and the metering block. O-rings included.

#6 female to #6 female
 

Price: $13.50
Quantity:
« Previous | Next »

These products are recommended with this item

Valves - Secondary, Idle Check, other Brass Enderle
Valves - Secondary, Idle Check, other Brass Enderle
Part # EN6001

NEW Hilborn-Enderle  Brass Secondary and Idle Check Valve ( Also called low speed )
Available  from 1  lb through 150 lb  in  5 lb increments .
 

Price: $44.00
Details
Hilborn Replacement 8 Cylinder Side Mount-Barrel (Metering) Valve Stack Injectors
1 of 3
Hilborn Replacement 8 Cylinder Side Mount-Barrel (Metering) Valve Stack Injectors
Part # AD-VB8.54

Side Mount 8 cylinder Metering Valve for stack injections -


 

Price: $250.00
Details
Hilborn Barrel (Metering) Valve Upgrade Kit w #54 Spool
Hilborn Barrel (Metering) Valve Upgrade Kit w #54 Spool
Part # AD54KIT

Upgrades a Hilborn Barrel Valve from a #23 to a #54 Spool so you can install a secondary ( low speed ) valve-  included with kit

Price: $139.00
Details
Hilborn 8 Stack - Barrel (Metering) Valve Bottom/ Side Mount- Hoses go Front and Rear Sprint car 305-360-410
1 of 3
Hilborn 8 Stack - Barrel (Metering) Valve Bottom/ Side Mount- Hoses go Front and Rear Sprint car 305-360-410
Part # AD-VB8G-54

 

 

Price: $250.00
Details
Hilborn #58 Rotator Spool will work in a Kinsler Barrel valve
Hilborn #58 Rotator Spool will work in a Kinsler Barrel valve
Part # AD-BV58

Barrel (Metering) Valve Rotator Spool  #58  use a 61 if we are out of 56 

Price: $55.00
Details
Hilborn #54 Rotator Spool- Barrel Valve works in Kinsler
1 of 2
Hilborn #54 Rotator Spool- Barrel Valve works in Kinsler
Part # AD-BV54

 

 

Price: $55.00
Details
Hilborn 8 Cylinder Barrel (Metering) Valve Hilborn, Engler, Kinsler, Crower, Jackson ,
1 of 2
Hilborn 8 Cylinder Barrel (Metering) Valve Hilborn, Engler, Kinsler, Crower, Jackson ,
Part # AD-VB8A

Bottom Mount 8 cylinder Metering Valve - Stands up on most Stack injections . Most Common unit on all Late Style units

 

Price: $250.00
Details
Enderle Barrel (Metering) Valve Repair Kit for K Valve
Enderle Barrel (Metering) Valve Repair Kit for K Valve
Part # ENMVORNM

 K Valve Kit  for Enderle Nitro Style K Valves

Price: $14.00
Details
Barrel Valve Secondary (Metering) Adaptor
1 of 2
Barrel Valve Secondary (Metering) Adaptor
Part # HILF512-1

Adaptor to enable you to put a secondary valve on a Hilborn Barrel Valve .

 

Price: $14.50
Details

These are our current best sellers.

Leakdown Tester Setting tool for Mechanical Fuel Injections-Leak Down tests -6 and -8 AN
Leakdown Tester Setting tool for Mechanical Fuel Injections-Leak Down tests -6 and -8 AN
Part # LeakdownAD

Works with any mechanical injection system. 

 

 

 

 

Price: $185.00
Details
Hoses Enderle Straight Nozzle Hoses Female #3AN to - Straight
1 of 2
Hoses Enderle Straight Nozzle Hoses Female #3AN to - Straight
Part # EN-4035A


 

 

Price: $17.00
Details
Hex Aluminum Linkage Rods 10-32 Thread
Hex Aluminum Linkage Rods 10-32 Thread
Part # EN560XXX

Aluminum Hex Linkage Rods - Heim Joints Not included
Drilled 10-32 Thread one RH one LH  -Each Heim Joint ( Rod End )  will add 3/4" so add 1- 1/2" to each link to figure you total length 

 

Price: $10.00
Details
Gasket - Inlet Gasket with Screen for 6-71 8-71 GMC Type Blower 4 Hole
Gasket - Inlet Gasket with Screen for 6-71 8-71 GMC Type Blower 4 Hole
Part # EN671SGA

Screen Gasket for GMC Type Blower   13.25" Center to center  
6-71, 8-71, 10-71, 14-71  

Price: $16.00
Details
Gasket - Inlet Gasket for 6-71 8-71 10-71 14-71 GMC Type Blower 4 Hole
Gasket - Inlet Gasket for 6-71 8-71 10-71 14-71 GMC Type Blower 4 Hole
Part # EN671GA

Gasket for GMC Type Blower
6-71, 8-71, 10-71, 14-71

Price: $10.00
Details
Enderle Pills Jets Bypass Jets (Pills) .020-.190
1 of 3
Enderle Pills Jets Bypass Jets (Pills) .020-.190
Part # EN7009

3rd picture shows a selection we sell    7009.asst

Price: $4.75
Details
Enderle Nozzle Ends- "Drilled" Can be used in Blown Hat Injectors fits Enderle Nozzle Bodies
1 of 3
Enderle Nozzle Ends- "Drilled" Can be used in Blown Hat Injectors fits Enderle Nozzle Bodies
Part # EN7007

Screw In Nozzles for Two Piece Nozzle Bodies

DRILLED but NOT Matched-  For Blower Hats  only

for Port Nozzles and All Unblown engines use - 7007-PI

 

Price: $6.00
Details
Enderle "E" Style Nozzle Ends " Precision "Drilled -Flowed " for Enderle Nozzle Bodies
1 of 3
Enderle "E" Style Nozzle Ends " Precision "Drilled -Flowed " for Enderle Nozzle Bodies
Part # EN7007-E

Screw In Nozzles  for All Enderle   Two Piece Nozzle Bodies-

These are Flowed style nozzles and have two numbers stamped on them - the 2nd number is the size the first number represents lbs of fuel an hour 

Can be used in any Unblown  engine-  Must be used in Un -Blown engines  with individual runners. for even temperture

See our 7007-PI  nozzles for port nozzles and/or unblown runners -  precision drilled

 

 

 

 

Price: $8.95
Details
Alkydigger's Black Screen Print T Shirt Cotton
1 of 2
Alkydigger's Black Screen Print T Shirt Cotton
Part # ADTSHIRT

Price: $20.00
Details
Contact Us

 

615-457-3192

 

10 AM - 5 PM M-F CST
Closed Weekends

 

Sales & Orders: Toni, Shannon, Mike

 

Tech Questions returned when time permits
Email Tech

 

FAX: 615-873-1876

Shopping Cart
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout
View our Customer Gallery
Don Enriquez