Blowers and Turbo Information How to measure for a Belt GuardRoots Blower Sizes and some interesting characteristicsSpark plug RecommendationsMeasurements for the 192 and 250 Billet TBS BlowersSet up Instructions for Blow Through Mechanical SystemsHow many ounces of oil should I put in my Supercharger front cover?What Does a MAP Sensor Do, and Where does it go?Lobe Separation Angle and how it works with Blown and Unblown enginesSome Q and A about boost and pump gas vs E-85 and methanolAlkydigger’s Turbo/ ProCharger Boost referenced Flow Valve BV1062Information About Boost and Various Blower Designs BehaviorBlower Bottom Openings for Race BlowersBelt Length, using center to center8MM Drive Ratio ChartHigh Helix vs Standard Helix Blower RotorsPhysical size of a12-20 AMP MSD Magneto – helpful for Blower ClearanceSimple way to pin a blancer if you don’t have double key waysTurbo Blow Through Schematic – using power nozzles with idle nozzlesTBS Boost ChartHow to identify a Delta Opening “Retro” Blower – Requires a Setback PlateCommon Supercharger Questions & AnswersBlower Ratio Chart for 13.9mm, 14mm and 1/2″ Pitch PulleysBlower Cam profiles vs Nitrous and UnblownDyer’s Common Blower SpecsBlower Boost Chart
