Facebook TwitterPinterest
 Checkout
305- 360 Hilborn  Mega Power Aluminum 2-3/16"  305 Race Saver w Small port  1204-1205   " Race Savers "
1 of 3 (Enlarge)
Part # HIL327C8NA(2-3/16)
305- 360 Hilborn Mega Power Aluminum 2-3/16" 305 Race Saver w Small port 1204-1205 " Race Savers "

Beats much higher priced Kinslers and Englers  on Flow .


2-3/16"    305  and 360  Sprint cars and dragsters up to 383  cu inch- 

 Mega Power  Race Saver ports - size

1.20” x 2.0” x .28 web between ports

Ram Tubes $20 each for Steel if purchased with injection  

The Hilborn Race Saver Sprint Series MEGA Power Injector picks up were the Race Saver R.A.W. Power injector leaves off. The curve throat design enhances airflow for increased mid-range and top end power without sacrificing throttle response or engine acceleration. The throat and runner of the Race Saver Mega Power injector is sized specifically for use on the restrictive Race Saver head to increase airspeed and cylinder fill. Features full CNC porting for those looking for maximum potential.

Also, features new from Hilborn Fuel Injection are new, no-nonsense cross shaft linkage. This design uses heavy duty rod ends along with a 3/8 cross shaft, providing superior rigidity. The rod ends attach directly to the casting eliminating mount/mounting failures as seen with other brands. Simple, yet rock solid!

Hilborn Fuel Injection’s Race Saver MEGA Power injector provides the power you need to win while keeping you on budget. Along with out of the box performance, these injectors feature the following:

 

  • High quality heat treated aluminum castings
  • Precision machined in-house
  • CNC port openings standard. Full CNC porting.
  • Front mounted metering block
  • Clear anodize finish for long lasting durability
  • Specifically designed and calibrated for the Race Saver series

The Hilborn Race Saver MEGA Power injector comes completely assembled with shafts, butterflies, linkage, coolant fittings, barrel valve, hoses, nozzles (Race Saver specific 5-1/2” nozzles flowed and matched), bypass and secondary valves and 3 main jets.

Note: Does not come with stacks.

Race Saver base tune-up:

 

  • Size #0 Pump
  • #10 Nozzles
  • .070 Main Jet
  • 65psi Hi-Speed with a .070 Jet
  • 30psi Secondary
  • .002" Butterfly clearance at idle
  • 16% leak down with Secondary capped off

 

Race Saver Setup ----- Call Mike    615-457-3192
    Contact info@alkydigger.com      for more information or to place an order.

 

Price: $3,390.00
Linkage- Cross Shaft
Add Cross Shaft Linkage (+$229.00)
Quantity:

These products are recommended with this item

Part # BellCrank2
Alky's Bell Crank - Bellcrank-  Kit Stack Injection Hilborn Kinsler Change Linkage Direction
1 of 5

Price: $129.95
Part # EN-SG1-570
Fuel Pump - EnderleTwin Gear Billet Fuel Pump SG-.5 - 5.5 GPM
1 of 5

Inlet Size- If Not choosing loop below
No fitting on inlet
8AN (+$12.00)
10AN (+$14.00)
12AN (+$17.00)
3/4" Slip on (+$17.00)
Drive
Belt
Cam
Add Pump Saver Loop
Add loop w -8AN Flare (+$115.00)
Add loop w -10AN Flare (+$115.00)
Add loop w -12AN Flare (+$115.00)
Add loop with 3/4" Slip on inlet (+$115.00)
Price: $679.00
Part # EN-SG1-480
Fuel Pump - EnderleTwin Gear Billet Fuel Pump SG-0 - 4.4 GPM
1 of 5

Inlet Size- If Not choosing loop below
No fitting on inlet
8AN (+$12.00)
10AN (+$14.00)
12AN (+$17.00)
3/4" Slip on (+$17.00)
Drive
Belt
Cam
Add Pump Saver Loop
Add loop w -8AN Flare (+$115.00)
Add loop w -10AN Flare (+$115.00)
Add loop w -12AN Flare (+$115.00)
Add loop with 3/4" Slip on inlet (+$115.00)
List Price: $749.00
Price: $679.00
Part # HIL-CL100-1
Hilborn JackShaft - Cross Shaft  Throttle Linkage for SB-BB Chevy Injections
1 of 3

Add Arms
(2) F105 Billet (+$49.00)
Add F108 Drive Arm
Add Drive Arm F108 (+$21.00)
Price: $239.00

These are our current best sellers.

Part # ADTSHIRT-SP
Alkydigger
ADTSHIRT-SP
Alkydigger's Black Screen Print T Shirt Cotton
1 of 2

  
  
  
  
  
  
  
Price: $20.00
Part # EN7007-E
Enderle
EN7007-E
Enderle Nozzle Ends  Reamed  "Flowed" - MATCHED  for Enderle Nozzle Bodies
1 of 3

Price: $9.50
Part # EN7007
Enderle
EN7007
Enderle Nozzle Ends- "Drilled"  for mostly  Blown Engines- for  Enderle Nozzle  Bodies
1 of 3

List Price: $6.29
Price: $5.50
Part # EN7009
Enderle
EN7009
Enderle Pills Jets  Bypass Jets (Pills) .020-.190

Price: $4.25
Part # HILF565
Hilborn
HILF565
Hilborn Pills Jets  Bypass Jets (Pills) .030-.210

Price: $5.50
Part # HILHOSES1
Hilborn
ADHOSES1
Hoses  Hilborn  , Ron's  , Kinsler  Straight Hoses 5" to 30" Lengths
1 of 3

Price: $22.00

Alkydigger
307 White Bridge Pike
Nashville, TN 37209

9:30 AM - 5 PM M-F CST

Sales & Orders: Toni, Shannon, Mike

Tech Questions returned when time permits
Email Tech

FAX: 615-873-1876

Email Us


Customer Gallery
Customer Gallery

Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout
Login Status  Login Status

Not logged in

» Login