Facebook TwitterPinterest
 Checkout
.Bugcatcher EFI  Complete-- 900-1200 HP  w External Fuel Rails
1 of 5 (Enlarge)
Part # EN5005EFI-16
.Bugcatcher EFI Complete-- 900-1200 HP w External Fuel Rails

Enderle-Hilborn Bugcatcher Setup Blown -External Fuel Rails with 16  Injectors for  900-1200  hp on

Gas  or E-85- 16 injectors- Fuel Rails- Weldon Fuel Pump- Weldon Regulator and controller - Dominator Computer

 

 

EFI Bug catcher- for 900 + +  HP  setups 
Alky Digger’s new EFI Bug catcher comes complete and is suitable for applications up to 1250 hp. The three-butterfly hat-style injector fits 6-71 and 8-71 applications and features Hilborn/Holley Self Adjusting Software. You can adjust it or leave it alone. It’s very streetable and can return better mileage than carbs.
The Enderle hat called the Bug Catcher is recommended for most street rods although the Big and Ugly EFI is available too if you like.

They’ve successfully married Enderle and Hilborn in this beautiful transformation. All Enderle hats come fully polished, or it can receive an optional simulated carbon fibre finish for a wild and modern look.

Their 1.5" inch tall   injector plate is designed in house at Hilborn Fuel Injection and distributed by Alkydigger.com . With this setup , the injectors are exposed on each side.

Top it off with their optional mechanical hard line kit for the most authentic racing look around. The one inch adapter plate can also be configured with eight internal  injectors See our hidden injector model-  .
Standard Features:

  • Hilborn/Holley self adjusting software
  • 3 -11/16" butterflies
  • High quality, heat-treated aluminium casting
  • Polished finish
  • Comes fully assembled with shaft, butterflies, linkage, fuel rail and TPS mounted with connector and vacuum kit.
  • Fuel pump, Weldon  2025 - Regulator- ECU-Wiring- Sensors  , software- Fuel pump controller
    -12 AN Dual Fuel Filters
    Options:
  • Butterflies available in red, purple, blue or black
  • Powder coat (black shown in bottom photo)
  • Simulated carbon fibre coating
  •  
  • Mechanical hard line kit 
  • Block off of one butterfly internally for low boost or under 450ci engines   - Helps come off idle smoother
 
Options: Call for price
  • powder coat (black shown in bottom photo)
  • simulated Carbon Fiber coating
  • mechanical hard line kit 
  • Block off of one butterfly internally ( still has 3 that open ) for low boost engines, or under 450 cu in engines.   This aids in throttle tip off from idle- not necessary if you don't drive in heavy traffic  much  
    High HP option includes:
  • Dual O2 Sensors
  •  

Let Alkydigger supply your Enderle injector, convert your original or supply a complete EFI  kit for you to install. Proudly made in the USA! Call Mike  or Toni  at Alkydigger  615- 457-3192 for more details. 

 

Price: $7,985.00
Finish - Bugs
Simulated Carbon Fiber Coating (+$495.00)Black Powder Coat (+$250.00)
Block off
Block off internally one butterfly - for low boost engines (+$200.00)
Idle Air Control Valve
FAST IAC add on (+$259.00)
Black Anodize EFI Hat
Black Anodize Hat Inj (+$225.00)
Hardline
Mechanical Hardline Kit (+$375.00)
Quantity:

These products are recommended with this item

Part # PI-K4408
" Phenix "    E-85   Black Nylon Braided Vapor Lock Hose -8 by the Foot 750 psi Made in USA

Price: $9.00
Part # PI-K410
" Phenix "  Black Nylon Braided Hose -10 AN   by the Foot 600 psi Made in USA

Price: $8.75
Part # PI-K4410
" Phenix "  Black Nylon Braided Vapor Lock Hose -10 AN   by the Foot 600 psi Made in USA

Price: $10.00
Part # PI-K408
" Phenix " Black Nylon Braided Hose -8 by the Foot 750 psi Made in USA

Price: $7.75
Part # TBS-4324
Adapter - Big & Ugly Reverse Marine   Injector Adapter
1 of 2

Black Anodize
Black Anodize (+$35.00)
Price: $200.00
Part # TBS-4335
EFI Blower  Injector Plate for Dual Throttle Bodies Using 8 Injectors with Fuel Rails Billet The Blower Shop
1 of 2

Price: $800.00

These are our current best sellers.

Part # ADTSHIRT-SP
Alkydigger
ADTSHIRT-SP
Alkydigger's Black Screen Print T Shirt Cotton
1 of 2

  
  
  
  
  
  
  
Price: $20.00
Part # EN7007-E
Enderle
EN7007-E
Enderle Nozzle Ends  Reamed  "Flowed" - MATCHED  for Enderle Nozzle Bodies
1 of 3

Price: $9.50
Part # EN7007
Enderle
EN7007
Enderle Nozzle Ends- "Drilled"  for mostly  Blown Engines- for  Enderle Nozzle  Bodies
1 of 3

List Price: $6.29
Price: $5.50
Part # EN7009
Enderle
EN7009
Enderle Pills Jets  Bypass Jets (Pills) .020-.190

Price: $4.25
Part # HILF565
Hilborn
HILF565
Hilborn Pills Jets  Bypass Jets (Pills) .030-.210

Price: $5.00
Part # HILHOSES1
Hilborn
ADHOSES1
Hoses  Hilborn  , Ron's  , Kinsler  Straight Hoses 5" to 30" Lengths
1 of 3

Price: $20.00

Alkydigger
307 White Bridge Pike
Nashville, TN 37209

9:30 AM - 5 PM M-F CST

Sales & Orders: Toni, Shannon, Mike

Tech Questions returned when time permits
Email Tech

FAX: 615-873-1876

Email Us


Customer Gallery
Customer Gallery

Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout
Login Status  Login Status

Not logged in

» Login