Facebook TwitterPinterest
* 80A Enderle   Fuel Pump - Dash 1/2     5.5 gpm
1 of 2 (Enlarge)
Part #: EN3002-5
* 80A Enderle Fuel Pump - Dash 1/2 5.5 gpm


80A-0  4.0 gpm at 4000 rpm- 
80A-1/2   5.5 gpm at 4000 rpm
80A-1      7.0 gpm at 4000 rpm
See full description for flow ratings
Reversable, for Belt Drive or Timing Cover Drive .
We buy some good used pumps- call us for details- 

We flow pumps- Send yours in if unsure of its performance

The 80A pump is Enderle's workhorse.
It is used anywhere that you would use a Hilborn, 150 a  Kinsler, or DSR 0  1/2  or 1    pump or Waterman 300  400 or 500
The principle difference in this and the Hilborn PG150C is that the Enderle pump has one outlet, whereas Hilborn has three.

To use an Enderle pump on a Hilborn or Kinsler setup, we must install a T-fitting on the outlet or install a four-way shutoff valve
which will allow the installation of the Hilborn or Kinsler bypass valve.  Tell us or order a 4 way shut off or a  Swivel T with a swivel on the Run.

This pump is reversible for use on TC or belt drive. Just let us know that you need it reversed!

Please choose your pump according to your flow performance needs:  


If you're not sure of your fuel pump needs, contact us for some help and we'll get you set straight!-  Size matters big time  615-457-3192 MIKE or TONI
DO NOT RUN A BLOWN OR TURBO  ENGINE LEAN TRYING TO SAVE $$$ ON A FUEL PUMP      nothing is more expensive than doing it twice

Price: $549.00
Timing Cover
Belt Drive
80A Flange
Deduct - no flange ($-38.00)

These products are recommended with this item

Part #: EN859-6
"Y" Outlet Manifold -8AN in and (3) -6AN out
1 of 2

Price: $30.00
Part #: 80A-FuelPumpPACKAGE
*80A Enderle  Fuel Pump Combo -  Fuel Pump  with Return and Shut Off  w Pressure Gauge
1 of 3

Fitting Size
Price: $779.00
Part #: EN85105
-6 AN Shut Off Valve  - 2 Way Enderle  Hilborn

Price: $81.00
Part #: EN85110
-6 AN Shut off Valve 3 Way  - Enderle

-8 inlet fitting upgrade
Change inlet to -8 AN (+$3.00)
Price: $98.00
Part #: EN85110-8
-6 AN Shut off Valve 3 Way  - Enderle -with -8AN inlet

Price: $98.00
Part #: EN85115
-6AN Shut off Valve  4 Way - Enderle

Price: $120.00
Part #: EN85215
-8 AN Shut Off Valve    4 Way  - Hilborn- Enderle- Kinsler

Price: $149.00
Part #: EN85205
-8 AN Shut Off Valve 2 Way - Enderle

Price: $109.00
Part #: EN85210
-8 AN Shut off Valve 3 Way Enderle

Price: $129.00
Part #: EN85210B
-8AN Shut Off Valve 3 Way Reverse In & Out for Carburetors Enderle

Price: $129.00
Fuel Shut Off Valve and Cable Kit- with Bracket & Pivot- 80A- Enderle , Ron's, Hilborn 150

Price: $199.50
Part #: HiSpeed-8AN
High Speed Valve  -  Bulkhead  T Adapter to install in -8 shut off or pump.

60# with .050 .060 .070
80# with .070 .080 .090
Price: $98.00
Part #: ENLOOP80A
Loop Kit- Pump Saver  for Hilborn PG150 and Enderle 80A Pumps with Return
1 of 3

Inlet Fitting
Price: $110.00
Part #: CC-091-W-3-4
Shut Off Cable Wire Pivot End

Price: $8.50
Part #: BC101
Shut Off Valve Bracket for  Cable - 80A or 150 Series Pumps
1 of 2

Add the Clamp
90 Degree Morse Clip (+$17.00)
Price: $29.00

307 White Bridge Pike
Nashville, TN 37209

615-873-1876 FAX


Email Us

Customer Gallery
Customer Gallery

Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout
Login Status  Login Status

Not logged in

» Login