Facebook TwitterPinterest
 Checkout
Surge Tank -  Mount Underhood  Mechanical Fuel Injection comes with Float and relay
1 of 6 (Enlarge)
Part # AD.Surge
Surge Tank - Mount Underhood Mechanical Fuel Injection comes with Float and relay

Mechanical Injection on the Street or Race  when using a  Rear Mounted Tank Racing  - For  rear tank vehicles, and Road Race cars.  Use your electric pump to fill up the surge tank, then the injection pump draws it's fuel from the surge tank.  Works with EFI systems using mechanical pump to prevent having to use a cable drive rear mounted pump. 

Can use Gasoline- E-85-E-98- Methanol  *

Should drain the methanol out  after each use *

 

Billet Construction -100% Welded

Comes with  12 Volt Relay  for wiring up the float to the fuel pump - 

Can be filled from the top or bottom

Internal Stainless float will turn electric pump on and off as it fills

Allows you to use an  rear  electric pump to move fuel to the front so that a mechanical injection system pump can be used without starving for fuel.  *

Hooking it up without a relay can destroy the float-   no guarantee for floats that are shorted out- we test each one when installing it .

Has two (2) built in return ports for your by pass valves to return the fuel to.

Has a large breather vent port on top.

 

Float is easily removed to service, clean, or replace if needed.

 

Holds approximately 1.65 gallons. 

5" Wide x 8" Wide  x 11" Tall   Rectangular

Is constantly being filled from your electric pump, as well as your returned fuel. 

Has optional  billet mounts that are able to be moved for convenient mounting.

 

Highly recommend venting this tank back to the main tank  in the event of an overflow it will then overflow back to the rear tank-    you can install our rollover vent in the tank, but could suffer fuel overspill if the float ever sticks. 

The Tank specs below :

Holds approximately 1.65 gallons. 

5" Wide x 8" Wide  x 11" Tall   Rectangular


Bottom:   1- 3/4" NPT      1- 1/2" NPT        1- 1/4" NPT

Top :  1-  10AN  Boss    2- 8AN Boss 

 

For Wiring issues concerning the Relay -  please contact Kurt Welfel   615-864-4690    We are  fairly ignorant of wiring  issues . 

 

Alkydigger Inc. Not responsible  or liable for damage or fire done to any vehicle as a result of high performance parts that are sold on this site.  

Racers and Users understand that racing and rodding can be dangerous, and result in personal damage, and accept that responsibility


 

 

Price: $489.00
Mounts
(2) Billet Mounts (+$40.00)
Choose Outlet Size
12AN (Standard) (+$18.00)
10AN (+$14.00)
8AN (+$12.00)
Fittings
Fitting Kit- (+$60.00)
Quantity:

These products are recommended with this item

Part # EN4056B
Billet  Fuel Filter and  Fittings - Anodized Classic Nostalgia Fuel Injection Filter -Choose Fitting Size

Fitting Sizes
2- -8AN (+$18.00)
2- 10AN (+$20.00)
2- 12AN (+$24.00)
2 -16AN (+$28.00)
#8 and #10 (+$19.00)
#8 and #12 (+$20.00)
#10 and #12 (+$22.00)
2- -20AN (+$34.00)
Screen
40 Micron (Gas/E85 Filter)
40 Mesh (Alcohol Filter)
Price: $82.00
Part # 4inturbo
Blow Through Pro Charger  / Turbo  Mechanical Blow Through Kit  8-Cylinder Engine 4"  Single Throttle Body
1 of 6

Add Manifold Turbo Blow Through
BB Chevy Rec Port Std Head (+$495.00)
BB Chevy Big Chief Splayed port (+$895.00)
SB Chevy 23 degree (+$495.00)
Holley for LS 3 Rec (+$375.00)
Holley for LS1 Ls2 (+$375.00)
EdelbrockVictor for MoPar 440 (+$450.00)
Pontiac- (+$495.00)
Olds 455 (+$495.00)
No manifold
Price: $3,695.00
Part # PI-J400-3
Fitting - Compression Swivel Hose End 4AN

Price: $5.25
Part # JB-FLTSWTC
Float Switch - Replacement Float Switch for our Surge Tank

Weld In Bung
Add a weld in bung 1/2 BSP (+$10.00)
Price: $47.50
Part # ADFIL001-10
Fuel Filter - Anodized Billet Aluminum Inline Filter 10AN 30, 60, or 100 Micron

Micron
30 micron
60 micron
100 micron
Add a Billet Mount Bracket
Billet Filter Mount Bkt PI-321-1-0 (+$29.50)
Price: $120.00
Part # ADFIL001-12
Fuel Filter - Anodized Billet Aluminum Inline Filter 12AN 60 Micron or 100 Micron

Micron
30 micron - GAS
60 micron - GAS -E85
100 micron- Methanol
Price: $120.00
Part # ADFIL001-6
Fuel Filter - Anodized Billet Aluminum Inline Filter 6AN 30 60 or 100 Micron

Micron
30 micron
60 micron
100 micron
Add a Billet Mount Bracket
Billet Filter Mount Bkt PI-321-1-0 (+$29.50)
Price: $110.00
Part # ADFIL001-8
Fuel Filter - Anodized Billet Aluminum Inline Filter 8AN 30 or 60 Micron

Micron
30 micron
60 micron
Add a Billet Mount Bracket
Billet Filter Mount Bkt PI-321-1-0 (+$29.50)
Price: $120.00
Part # EN3002-0
Fuel Pump   80A  G- Rotor Enderle  - Dash 0  - 4.0  gpm
1 of 5

Rotation
Timing Cover
Belt Drive
80A Flange
Deduct - no flange ($-38.00)
Price: $649.00
Part # EN3002-5
Fuel Pump  80A G Rotor  Enderle   - Dash 1/2     5.5 gpm
1 of 5

Rotation
Timing Cover
Belt Drive
80A Flange
Deduct - no flange ($-38.00)
Price: $649.00
Part # EN3003
Fuel Pump  G Rotor  80A Enderle    - Dash 1 - 7.0  gpm
1 of 5

Rotation
Timing Cover
Belt Drive
80A Flange
Deduct - no flange ($-38.00)
Price: $649.00
Part # WRC250300LW
Fuel Pump - Waterman 300 -  Fuel Pump 3 gpm

Drive
Belt
Cam
Inlet Fitting
#12 (+$20.00)
Price: $595.00
Part # WRC250400
Fuel Pump - Waterman 400 - 0 (Zero) Fuel Pump

Drive
Belt
Cam
Inlet Fitting
#12 (+$20.00)
Price: $589.99
Part # WRC250500
Fuel Pump - Waterman 500 - .5 (1/2) Fuel Pump

Drive
Belt
Cam
Inlet Fitting
#12 (+$20.00)
Price: $589.99
Part # WRC250600
Fuel Pump - Waterman 600 - Dash 1  Fuel Pump

Drive
Belt
Cam
Inlet Fitting
#12 (+$20.00)
Price: $679.00
Part # HILF1200-01
Hilborn In Line Fuel Filter ELEMENT ONLY

Element
25 micron GAS
149 micron Methanol
List Price: $73.00
Price: $65.00
Part # BlowThrough6cyl
Turbo /Pro Charger Blow through Mechanical -  Fuel Injection Kit  6 -Cylinder Engine 4"  Single Throttle Body
1 of 2

Billet Fuel Pump Upgrade
Enderle Big Twin Gear Pump (+$650.00)
Price: $2,875.00
Part # 5in.turbo
Turbo Blow Through Mechanical  Kit for 8-Cylinder Engine  5" Single Throttle Body or Progressive
1 of 3

Add Manifold Turbo Blow Through
BB Chevy Rec Port Std Head (+$495.00)
BB Chevy Big Chief Splayed port (+$895.00)
SB Chevy 23 degree (+$495.00)
Holley for LS 3 Rec (+$375.00)
Holley for LS1 Ls2 (+$375.00)
EdelbrockVictor for MoPar 440 (+$450.00)
Pontiac- (+$495.00)
Olds 455 (+$495.00)
No manifold
Price: $4,200.00

These are our current best sellers.

Part # ADTSHIRT-SP
Alkydigger
ADTSHIRT-SP
Alkydigger's Black Screen Print T Shirt Cotton
1 of 2

  
  
  
  
  
  
  
Price: $20.00
Part # EN7007-E
Enderle
EN7007-E
Enderle Nozzle Ends  Reamed  "Flowed" - MATCHED  for Enderle Nozzle Bodies
1 of 3

Price: $9.50
Part # EN7007
Enderle
EN7007
Enderle Nozzle Ends- "Drilled"  for mostly  Blown Engines- for  Enderle Nozzle  Bodies
1 of 3

List Price: $6.29
Price: $5.50
Part # EN7009
Enderle
EN7009
Enderle Pills Jets  Bypass Jets (Pills) .020-.190

Price: $4.25
Part # HILF565
Hilborn
HILF565
Hilborn Pills Jets  Bypass Jets (Pills) .030-.210

Price: $5.50
Part # HILHOSES1
Hilborn
ADHOSES1
Hoses  Hilborn  , Ron's  , Kinsler  Straight Hoses 5" to 30" Lengths
1 of 3

Price: $22.00

Alkydigger
307 White Bridge Pike
Nashville, TN 37209

9:30 AM - 5 PM M-F CST

Sales & Orders: Toni, Shannon, Mike

Tech Questions returned when time permits
Email Tech

FAX: 615-873-1876

Email Us


Customer Gallery
Customer Gallery

Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout
Login Status  Login Status

Not logged in

» Login